Brands
Single-phase electric motor 0.33 HP 1400 rpm 4 poles MEC 63 Form B5 - 230 V
  • Single-phase electric motor 0.33 HP 1400 rpm 4 poles MEC 63 Form B5 - 230 V

Single-phase electric motor 0,33 HP 1400 rpm 4 poles MEC 63 Form B5 - 230 V

Single phase electric motor 0,33 HP 4 poles 1400 rpm MEC 63 Forma B5 - 230 V

Electric motor of Italian production.

Our motors are made in accordance with UNEL tables (13113-71, 13117-71, 13118-71) and respond in all respects to IEC international standards. They also comply with the "Low Voltage Directive" 2014/35/EU and the "Electromagnetic Compatibility Directive" 2014/30/EU

€77.05
Quantity

Description

Engine Construction

Engine casings are constructed of die-cast aluminum alloy. All casings are sandblasted and subjected to chemical treatment that retards environmental oxidation.

Shafts are made of C45 steel according to unified standards. For particular applications it is possible to supply them in steel with different mechanical characteristics and according to the customer's drawing.

The bearings we use are made by leading companies in the industry and are manufactured specifically for electric motors, are prelubricated with lithium grease and axially preloaded through compensation rings in hardened steel. On request we can supply bearings lubricated with special grease for high temperatures.

General conditions

The electric motor is a component that can give rise to risks of mainly electrical origin. If used inappropriately, it can cause damage to people, animals and property. Here are some practical tips for the competent personnel responsible for installing and operating the motor

Installation

  • Check that the motor has not been damaged during transport; remove any fasteners or guards used during transport; check that the shaft rotates freely.
  • Carefully check the correspondence between the rated characteristics shown on the plate and the characteristics of the application for which the motor is intended.
  • Pay attention to direct couplings and couplings with pulleys; excessive force can irreparably damage the motor bearings. In case of belt couplings, to avoid damages and/or vibrations, a perfect parallelism between the axis of the motor and the pulley must be guaranteed.
  • When mounting the motor with feet (form B3), the same must be fixed to a solid and perfectly flat surface. In fact, any deformation suffered by the feet when tightening the fixing screws may cause them to break.
  • In the case of motors with B14 flange and through pins, the length of the fixing screws must be determined in advance in order to avoid damage to the winding.

Commissioning

  • To prevent unwanted voltage drops, make sure that the power cables are suitable in terms of capacity and insulation for the starting and full load currents.
  • To protect the motor from overloads and short circuits, it is advisable to use appropriate protection circuits. In this regard, the use of fuses alone is not recommended.
  • Make all grounding connections in compliance with current regulations.
  • Before coupling, make sure that the direction of rotation of the motor corresponds to that of the application.

Standard sizes of single-phase motors B5

Misure standard motori monofase B5

Product Details
4 Items

Data sheet

Engine Type
Single phase
Engine power HP - kW
0.33 HP - 0.25 kW
Motor RPM
1400rpm 4 poles
Motor size
MEC 63
Motor Shape
B5
4 other products in the same category:

Single-phase electric motor 3 HP 1400 rpm 4 poles MEC 100 Form B3 - 230 V

Single phase electric motor 3 HP 4 poles 1400 rpm MEC 100 Form B3 - 230 V Electric motor of Italian production. Our motors are made in accordance with UNEL tables (13113-71, 13117-71, 13118-71) and meet in all the international IEC standards. They also comply with the "Low Voltage Directive" 2014/35/EU and the "Electromagnetic Compatibility Directive"...

More
In stock

Single-phase electric motor 2,5 HP 1400 rpm 4 poles MEC 90 Form B3 - 230 V

Single phase electric motor 2,5 HP 4 poles 1400 rpm MEC 90 Forma B3 - 230 V Electric motor of Italian production. Our motors are made in accordance with UNEL tables (13113-71, 13117-71, 13118-71) and meet in all the international IEC standards. They also comply with the "Low Voltage Directive" 2014/35/EU and the "Electromagnetic Compatibility Directive"...

More
In stock

Single-phase electric motor 0,33 HP 2800 rpm 2 poles MEC 63 Form B3 - 230 V

Single phase electric motor 0,33 HP 2 poles 2800 rpm MEC 63 Forma B3 - 230 VElectric motor of Italian production.Our motors are made in accordance with UNEL tables (13113-71, 13117-71, 13118-71) and respond in all respects to IEC international standards. They also comply with the "Low Voltage Directive" 2014/35/EU and the "Electromagnetic Compatibility...

More
In stock

Single phase electric motor 3 HP 2800 rpm 2 poles MEC 80 Forma B3 - 230 V

Electric motor single-phase 3 HP 2 poles 2800 rpm MEC 80 Forma B3 - 230 V Electric motor of Italian production. Our motors are made in accordance with UNEL tables (13113-71, 13117-71, 13118-71) and meet in all the international IEC standards. They also comply with the "Low Voltage Directive" 2014/35/EU and the "Electromagnetic Compatibility Directive"...

More
In stock