Bridge sawing machine Battipav SUPREME 260S
  • Bridge sawing machine Battipav SUPREME 260S

Bridge saw Battipav SUPREME 260S


Bridge saw Battipav SUPREME 260S

The sawing machine SUPREME 260S is a bridge saw ideal for cutting marble, granite and natural stone.

It makes cuts with manual advancement of the motor unit.

It is designed to work with disks Ø300 mm.

Equipped with:

  • Single-phase motor 230V~50Hz 3Hp/2,2Kw with thermal and amperometric protection
  • Minimum voltage switch
  • Current circuit breaker with manual reset
  • Sliding cutting head and tilting motor
  • Cutting advancement with handwheel
  • Laser tracer
  • Wheels kit
  • Adjustable legs
  • Adjustable goniometric square
  • Water recirculation pump type S3
  • Disc Ø 300 not included.


Used SUPREME 260S Sawing machine
Max cutting length 2600 mm
Max tile size for diagonal cutting 1839x1839 mm
Max cutting thickness 85mm
Max cutting thickness 45 60mm
Recommended tool diameter 300mm
Tool internal diameter Ø25.4 mm
Engine power 3Hp / 2.2Kw, 9A
RPM 2800min-1
Tray capacity Min 45/Max 50 liters
Motor Voltage SINGLE-PHASE 230V~50Hz
Machine dimensions 3365x770x H1410 mm
Machine weight 161.6kg
Bracket Standard
Worktop extension Optional
Worktop size 2715×625mm
Wheels Standard
Thermal protection 160°C
Laser tracker Standard
Handwheel advancement kit Standard
Roller extension Optional
Tile stop Optional


In extruded aluminum for maximum strength and lightness.

Extruded aluminum beam with high torsion resistance. Equipped with interchangeable stainless steel bearing guides.

Millimeter scale for quick execution of series cuts.

Professional standard goniometric square and millimeter stop.

Working extension (optional) in galvanized steel with the possibility of being mounted on both sides of the machine; it allows the cutting of large formats.


The motor unit carriage slides on the beam by means of eight ball bearings, four of which always work perpendicular to the beam.


Position for 45° cutting.

The wiring of the wires is integrated inside the beam to prevent them from interfering in the cutting zone.

3 Hp / 2,2 Kw motor with thermal and amperometric protection.


The cutting depth is adjusted by locking the tilting of the motor unit.

A convenient centimeter scale directly indicates the depth of cut.


The immediately accessible control panel includes:

  • Safety switch with minimum voltage coil.
  • Current circuit breaker with manual reset in case of disc locking.
  • Red light for network presence signal.
  • Green light for signaling machine operation.
  • Laser for maximum cutting precision (optional in the standard version).
  • Industrial type plug.


in large galvanized steel (620 mm).

ABS tank resistant to impact and wear.

  • Easy to clean.
  • Designed to separate cutting debris from the water recovery area.

Pump for water recirculation.

Product Details
3 Items
New product