![Electric tile cutter Battipav CLASS PLUS 1300S Electric tile cutter Battipav CLASS PLUS 1300S](https://www.cem-elettromeccanica.com/2691-large_default/electric-tile-cutter-battipav-class-plus-1300s.jpg)
![Electric tile cutter Battipav CLASS PLUS 1300S Electric tile cutter Battipav CLASS PLUS 1300S](https://www.cem-elettromeccanica.com/2691-large_default/electric-tile-cutter-battipav-class-plus-1300s.jpg)
The CLASS PLUS is a radial tile cutter ideal for cuts and jolly on ceramic, single-fired, porcelain stoneware and marble.
Innovative, with advanced technical solutions, solid and precise, is equipped with a cutting head with a POWERFUL MOTOR sliding and tilting.
Equipped with Ø 250 mm special stoneware disc.
Laser tracer and wheels kit supplied as standard only in the "S" version.
Equipped with:
Works with water
Special stoneware disc Ø250 mm included
Electric tile cutter CLASS PLUS 1300S | |
---|---|
Max cutting length | 1160mm ( 1300mm with H Max.42mm and tilting ) |
Max tile size for diagonal cut | 820X820mm (920x920mm with H Max 42mm) |
Max cutting thickness | 65mm |
Max cutting thickness 45 | 53mm |
Recommended tool diameter | 20mm |
Tool internal diameter | Ø25.4mm (also Ø15.8mm) |
Engine power | 1.8Hp / 1.4Kw |
RPM | 2800min-1 |
Tray capacity | Min 22/ Max 28 liters |
Motor Voltage | SINGLE-PHASE 230V~50Hz |
Machine dimensions | 1755 x 675 x H 1300mm |
Machine weight | 55kg |
Bracket | Standard |
Worktop extension | Optional |
Worktop size | 1354×523mm |
Wheels | Standard |
Thermal protection | 170°C |
Handwheel advancement kit | Standard |
Lateral support | Optional |
Long eyelets for lateral support | Optional |
Tile stop | Optional |
made of extruded aluminum with high torsion resistance. Equipped with interchangeable stainless steel bearing guides and a graduated millimeter scale for rapid execution of cuts.
The control panel includes:
- safety switch with minimum voltage coil;
- LASER module for maximum cutting precision (available only in the "S" version).
The motor unit carriage, made of aluminum, slides on the beam by means of eight ball bearings, four of which always work perpendicular to the beam.
The cutting head is tilting and can be locked at the desired height. It performs every kind of shaping.
Built to minimize bulk during transport and especially storage space.
The CLASS PLUS is a radial tile cutter ideal for cuts and jolly on ceramic, single-fired, porcelain stoneware and marble.
Innovative, with advanced technical solutions, solid and precise, is equipped with a cutting head with a POWERFUL MOTOR sliding and tilting.
Equipped with Ø 250 mm special stoneware disc.
Laser tracer and wheels kit supplied as standard only in the "S" version.
Equipped with:
Works with water
Special stoneware disc Ø250 mm included