- There are no more items in your cart
- Shipping
- Total €0.00
- PRODOTTI IN OFFERTA
- Accident prevention
- Installers' equipment
- World STIHL
- Compressors
- Electric pumps
- Electric pumps machine tools
- Power Tools
- Electrical material
- Rupes World
- Hoover motors
- Electric motors
- Industrial cleaning
- Power tool spare parts
- Spare parts for high-pressure cleaners
- Portable climate solutions
- Tool cases
- Ventilation
Brands
Electric pump SACEMI SPV 18
SPV 18
SPV 18
They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body made of PBT allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must not exceed 70°C.
Applications
They are commonly used on
- machine tools (cutters-turners-drills)
- glass processing machines (TRI version)
- printing machines
They are normally installed on a tank with a capacity proportionate to the flow rate, about 3-4 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS
Description
IMM 90A
They are suitable for transferring liquids containing impurities up to 4 mm in size. The hydraulic components: cast iron impeller and scroll, steel pump body, allow use with water, emulsions and oily substances in general, with viscosity not exceeding 21 cSt (3° Engel). The liquid temperature must not exceed 90°C.
Applications
They are commonly used on
- machine tools
- glass processing machines
- surface treatment plants
- filtration plants
- painting booths
They should normally be installed on a tank with a capacity proportionate to the flow rate, approximately 7-8 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 5-6 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments to allow the sludge to settle before it is pumped out of the pump.
Product Details
SPV 18
5 Items
New product
SPV 18
They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body made of PBT allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must not exceed 70°C.
Applications
They are commonly used on
- machine tools (cutters-turners-drills)
- glass processing machines (TRI version)
- printing machines
They are normally installed on a tank with a capacity proportionate to the flow rate, about 3-4 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS