TISSEL 200 are compact pumping units consisting of a centrifugal electric pump with integrated speed regulator (inverter) complete with external pressure sensor to be applied at one point in the system.
Robust and simple to operate, they are ideal for simultaneously generating constant pressure in all taps.
The built-in speed controller has forced ventilation and an IP 54 degree of protection. It receives a single-phase alternating voltage (230±10% V - 50/60 Hz) and supplies a three-phase alternating output voltage that powers the electric pump motor with efficiency class IE3.
Low electric pump wear since it runs at a low speed for most of its life and is started and stopped in a progressive manner.
Significant energy savings as at low flow rates it is like having a lower power pump running.
Stops the pump after a few seconds and performs programmed restarts over time to check water return.
- Runs with pressure less than the set minimum
Stops the pump after a few seconds (for example, when there is a pipe break).
- Currents - voltages - temperatures
Limits currents; alarms for out-of-limit voltages; protects against overtemperature and short-circuit between output phases.
||5 ÷ 80
||96 ÷ 56