TISSEL 200 are compact pumping units consisting of a centrifugal electric pump with integrated speed regulator (inverter) complete with external pressure sensor to be applied at one point in the system.
Robust and simple to use, they are ideal for simultaneously generating a constant pressure in all taps.
The integrated speed regulator has forced ventilation and an IP 54 protection rating. It receives a single-phase alternating voltage (230±10% V - 50/60 Hz) and supplies a three-phase alternating output voltage that powers the motor of the electric pump with efficiency class IE3.
Reduced electric pump wear as it runs at a low speed for most of its life and is started and stopped progressively.
Significant energy saving as at low flow rates it is like having a lower power pump running.
Stops the pump after a few seconds and performs programmed restarts over time to check water return.
- Runs with less than minimum set pressure
Stops the pump after a few seconds (e.g. when there is a pipe breakage).
- Currents - voltages - temperatures
Limits currents; alarms for out-of-limit voltages; protects against over-temperatures and short-circuits between output phases.
||5 ÷ 130
||97 ÷ 45