Brands
  • Reduced price
Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools
  • Electric pump SACEMI IMM 40 for machine tools

Three-phase electric pump SACEMI IMM 40 for immersion for machine tools

YT40IMAAA120

Three-phase electric pump SACEMI IMM 40 for immersion for machine tools

They are suitable for transferring liquids containing impurities up to 3 mm in size

The hydraulic components: impeller, scroll and pump body in PBT, allow the use with water, emulsions and oily substances in general, with viscosity not higher than 21 cSt (3° Engel)
The temperature of the liquid must not exceed 70°C
They are commonly used on
- machine tools (milling machines-turning machines-drills)
- glass processing machines (TRI version)
- air conditioning and conditioning systems
They are normally installed on a tank with a capacity proportionate to the flow rate, at about 2-3 cm from the bottom
It is important to check that the maximum level of liquid in the tank always remains 3-4 cm lower than the support flange (see figure)
In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to deposit before it is pumped out by the pump.
Axle length
€59.75
€58.56 Save 2%
Quantity

Description

Elettropompa trifase SACEMI IMM 40 da immersione per macchine utensili

Elettropompa trifase SACEMI IMM 40 da immersione per macchine utensili

Product Details
YT40IMAAA120
3 Items
New product